SOUND SYSTEMS FEB 1st 2008
RCS sells Phoenix, Dallee & myLocosound sound systems in Australia.
All sound systems are compatible with RCS. Supplied without speakers. Prices are in A$.
|
PHOENIX*
|
||
|
PB9
|
Digital sound with battery back up. Suits DC, DCC & Battery R/C. Screw terminals.
|
$550
|
|
PLP5
|
Full digital sound system. DCC & battery R/C compatible. Plug in.
|
$300
|
|
P5T
|
Add on plug in module. Expands R/C trigger options for the PB9 & PLP5.
|
$75
|
|
PLP5 CABLE
|
Plug in cable for wiring PLP5 to RCS/EVO BASIC/PnP ESC’s.
|
$20
|
|
B-CABLE
|
Plug in harness for connecting PB9 to RCS/EVO BASIC/PnP ESC’s.
|
$ 6
|
|
PROGRAM
|
Computer program + hardware for loading & customising sounds to pcb’s
|
TBA
|
|
DALLEE
|
||
|
BAT
|
Semi Digital sound system. Suits DCC & board battery R/C. Plug in connections.
|
$159
|
|
TRACK
|
Semi Digital sound system. Suits DC. With reed switch triggers. Plug in connections.
|
$169
|
|
MyLocosound
|
||
|
DIESEL
|
Synthesised low cost diesel sound. Suits small locos.
|
$99
|
|
STEAM
|
Great sounding, synthesised low cost steam chuff sound with a whistle.
|
$99
|
|
SPEAKERS
|
||
|
VARIOUS
|
We have a range of round and oval speakers to suit the above sounds. From.
|
$ 5
|
The full range of diesel & steam sounds, with sample sound files for the above manufacturers, can be heard at:
DALLEE. http://www.dallee.com Steam, Diesel, Miscellaneous & European. (sound samples to follow soon).
RCS supplies Phoenix sound systems preloaded with the sound of your choice. Or DIY with the Phoenix programmer.
PLP5 & PB9 SPECIAL INFORMATION
PLP5. The Phoenix PLP5 sound systemhas Plug’n’Play capability with the RCS-BASIC /EVO “B” & RCS-PnP-3 / EVO-PnP-3 series range of ESC’s. The optional extra # PLP5-CABLE isrequired.
The PLP5 is also compatible with the RCS ELITE & EVO “E” series controllers. Screw terminals are used.
Please note, the two variations require slightly different set ups in the config part of the Phoenix PLP5 sound files.
You MUST disable ALL DCC functions & set the DCC address to 0 (zero). Otherwise erratic operation may result.
PB9. The PB9 sound system can be interfaced with the RCS-BASIC /EVO “B” & RCS-PnP-3 / EVO-PnP-3 series range of ESC’s. The optional extra # B-CABLE is required.
The PB9 is also compatible with the RCS ELITE & EVO “E” series controllers. Screw terminals are used.
Please remember that the two variations require slightly different set ups in the config part of the Phoenix P5 sound files.
You MUST disable ALL DCC functions & set the DCC address to 0 (zero). Otherwise erratic operation may result.
SETTING UP & PROGRAMMING THE SOUND SYSTEMS YOURSELF.
ELITE & “E” series.
The Phoenix PB9 & PLP5 config files are preset from the factory to suit the ELITE and “E” series controllers.
The ELITE & “E” series controllers must have all the trigger functions in both the PB9 & PLP5 left at or set to LOW.
To install them simply load the full Phoenix program into your sound system.
The Phoenix system installer will automatically overwrite the config file. You must install matching files otherwise erratic system operation may occur. Once loaded reassign the trigger functions to suit RCS/EVO as outlined in the specific ESC instructions. Then save the config file in appropriate folder in your computer.
PnP-3, BASIC & “B” series.
Use the same procedure as above for the PB9 & PLP5 but be sure to set the trigger functions to HIGH.
RCS/EVO assigns the trigger functions the way we like it. See the RCS instruction sheets for specific assignments.
You can of course customise the files to suit whatever preferences you have. You can reassign any trigger function to any sound you wish to trigger.
Click HERE for a pdf file Price List.
Click HERE for a pdf file Price List.