# DEC-ADAPT
This is a small pcb with servo leads attached that will enable remote placement of the RX.
This is very useful if the RX would normally have to be mounted at Right Angles to the # DEC-U pcb. Like this: 
Take the # DEC-ADPT in one hand & the # DEC-U in the other: 
Then line up the pins 1 - 6 on the small pcb with the sockets on the # DEC-U: 
Push the small pcb gently into the socket:
The other end of the cables will look like this: 
The three way cable goes to servo outlet # 1 with the Orange wire towards the face of the RX.
The other single wire cables go sequentially in order.
The # DEC-ADPT kit can also be used for swapping servo leads so that an "A" radio can be used with the Group "B" program and vice versa.